Fuel Storage Systems Ltd (FSS)- Sebco™ 4800 Plastic Diesel Tank

Fuel Storage Systems Ltd (FSS)-
Sebco™ Plastic Diesel Tanks
Fuel Storage Systems Ltd (FSS) use the brand name Sebco™ for its range of above-ground fuel storage systems. The products available are:

• 990 litre 12 volt pumping non-bunded system for Diesel Fuel
• 2,300 litre fully integrated bunded system for Diesel Fuel
• 4,750 litre fully integrated bunded system for Diesel Fuel
• 10,000 litre fully integrated bunded system

All Sebco™ tanks are HSNO compliant, constructed to an ERMA approved Code of Practice, and are built to ISO9001 standards.

Specifications for Sebco™ 4800 Diesel Station

• Tank Type: Bunded storage and dispensing tank
• Orientation: Vertical
• Location: Above Ground
• Safe Fill Level: 4750 litres
• Diameter: 2400mm
• Height: 2350mm
• Inspection Aperture: 135mm
• Venting: 135mm
• Colour: Blue / Grey or alternatives at extra cost.
• Country of Manufacture: New Zealand
• Manufacturer: Fuel Storage Systems Limited
• Address: Company Road, Ashburton, South Canterbury
• Telephone: 0800 4 SEBCO (0800 473 226)
• Website: www.sebco.co.nz
• Material Type: Diesel Grade PE
• Chemical Stability: Diesel
• Ultra Violet Stabilised: Yes
• Fill Point: Ground level filling with 50mm Cam Lock or Direct fill
• Security: Lockable access door with pump isolation switch
• Dispensing: Via automatic nozzle / 4 metre flexible hose
• Additional Fittings: Choice of 240v or 12v pumping systems, Automatic nozzle, Flow meter, Remote Electronic Gauge, Bund warning alarm, Bulkhead light, Tie down points (for wind effected zones)
• Quality Assurance: HSNO Compliant — ERMA Approved Code of Practice, ISO9001
• Installation Requirements: As per supplied technical instruction book. All electrical connections to be made by a registered Electrician.
• Maintenance Requirements: As per supplied technical instruction book.

 Important Notice: All the information supplied is understood to be correct at the time of publication. However, FSS has a policy of continued improvement, so has the right to amend product specifications without notice.

Compliance: From 1 April 2007, an existing tank over 2000 litres must comply with one of the following:

• be bunded; or
• be managed in accordance with a code of practice or compliance plan which sets out a programme for bringing the tank into compliance with HSNO or otherwise provides a satisfactory means of environmental protection.

Click here to view and download additional product information about Sebco™ Diesel Stations.